Choose the type of thread
Application, Tooling
| 1Thread Type | ||
|---|---|---|
| 2 Thread Form |
| 3D = Thread Diameter | |||||
|---|---|---|---|---|---|
| 4Pitch / TPI | |||||
| 5L = Thread Length | mm | ||||
| Ds = chamfering diameter | mm | ||||
| Ls = drilling depth | mm | ||||
6Materials
PSteel
| Steel, Low Carbon, < 0,25% C < 400 N/mm2 | |
| Steel, Medium Carbon, < 0,55% C < 700 N/mm2 | |
| Steel, High Carbon, < 0,85% C < 850 N/mm2 | |
| Steel, Low Alloy, < 850 N/mm2 | |
| Steel High Alloy < 1200 N/mm2 | |
| 저탄소강 탄소 0,25% 이하 인장강도 40 Kg/mm2 이하 | |
| 중탄소강 탄소 0,55% 이하 인장강도 70 Kg/mm2 이하 | |
| 고탄소강 탄소 0,85% 이하 인장강도 85 Kg/mm2 이하 | |
| 저합금강 인장강도 85 Kg/mm2 이하 | |
| 고합금강 인장강도 120 Kg/mm2 이하 | |
| Stal nisko-węglowa, < 0,25%C < 400 N/mm2 | |
| Stal, średnio-węglowa, < 0,55% C < 700 N/mm2 | |
| Stal, wysoko-węglowa, < 0,85% C < 850 N/mm2 » 25 HRc | |
| Stal, niskostopowa, < 850 N/mm2 » 25 HRc | |
| Stal wysokostopowa < 1200 N/mm2 » 38 HRc | |
| Сталь, Низкоуглеродистая, <0,25% C <400 N / мм2 | |
| Сталь, Среднеуглеродистая, < 0,55% C < 700 N/мм2 | |
| Сталь, Высокоуглеродистая, <0,85% C <850 N / мм2 | |
| Сталь, низколегированная, <850 N / мм2 | |
| Сталь высоколегированная <1200 N / мм2 | |
| Acier, Faible teneur en Carbone ; < 0,25% ; C < 400 N/mm² | |
| Acier, Moyenne teneur en Carbone ; < 0,55% ; C < 700 N/mm² | |
| Acier, Haute teneur en Carbone ; < 0,85% C < 850 N/mm² | |
| Acier Faiblement Allié < 850 N/mm² | |
| Acier Hautement Allié < 1200 N/mm² |
MStainless Steel
| Stainless steel Free Machining |
| Stainless steel Austenitic |
| Stainless steel Ferritic and Austenitic |
| 스테인리스 스틸(쾌삭용) |
| 스테인리스 스틸 SUS 3xx 계열 |
| 스테인리스 스틸 SUS 4xx 계열 |
| Stal nierdzewna |
| Stal nierdzewna, austenityczna |
| Stal nierdzewna ferrytyczna i austenityczna |
| Легкообрабатываемая нержавеющая сталь |
| Нержавеющая сталь Аустенитная |
| Нержавеющая сталь Ферритная и Аустенитная |
| Acier Inoxydable |
| Acier Inoxydable Austénitique |
| Acier Inoxydable Ferritique & Austénitique |
KCast Iron
| Cast iron Lamellar Graphite < 500 N/mm2 | |
| Cast iron Lamellar Graphite < 1000 N/mm2 | |
| Cast iron Nodular Grap. Malleable < 700 N/mm2 | |
| Cast iron Nodular Grap. Malleable < 1000 N/mm2 | |
| 주철 인장강도 50 Kg/mm2 이하 | |
| 주철 인장강도 100 Kg/mm2 이하 | |
| 구상흑연 주철 인장강도 70 Kg/mm2 이하 | |
| 구상흑연 주철 인장강도 100 Kg/mm2 이하 | |
| Żeliwo szare, grafit lamelowy < 500 N/mm2 » 147 HB | |
| Żeliwo szare, grafit lamelowy < 1000 N/mm2 » 295 HB | |
| Żeliwo, sferoidalne, ciągliwe < 700 N/mm2 » 205 HB | |
| Żeliwo, sferoidalne, ciągliwe < 1000 N/mm2 » 295 HB | |
| Fonte Graphite Lamellaire < 500 N/mm² | |
| Fonte Graphite Lamellaire < 1000 N/mm² | |
| Fonte Graphite Spheroïdale/ Ductile FGS < 700 N/mm² | |
| Fonte Graphite Spheroïdale/ Ductile FGS < 1000 N/mm² | |
| Серый чугун (с пластинчатым графитом) < 500 N/мм2 | |
| Серый чугун (с пластинчатым графитом) < 1000 N/мм2 | |
| Высокопрочный чугун (с шаровидным графитом) < 700 N/мм2 | |
| Высокопрочный чугун (с шаровидным графитом) < 1000 N/мм2 |
NNonferrous
| Copper Unalloyed < 350 N/mm2 | |
| Copper Brass Bronze < 700 N/mm2 | |
| Copper High Strength Bronze < 1500 N/mm2 | |
| Aluminium Unalloyed | |
| Aluminium Alloyed < 0.5% Si | |
| Aluminium Alloyed < 10% Si | |
| Aluminium Alloyed > 10% Si | |
| Graphite | |
| 순동 인장강도 35 Kg/mm2 이하 | |
| 동 황동 청동 인장강도 70 Kg/mm2 이하 | |
| 동 고강도 청동 인장강도 150 Kg/mm2 이하 | |
| 순수 알루미늄 | |
| 알루미늄 합금 실리콘 0.5% 이하 | |
| 알루미늄 합금 실리콘 10% 이하 | |
| 알루미늄 합금 실리콘 10% 이상 | |
| 흑연 | |
| Miedź niestopowa < 350 N/mm2 » 105 HB | |
| Miedź, Mosiądz, Brąz < 700 N/mm2 » 205 HB | |
| Miedź, Brąz < 1500 N/mm2 » 46 HRc | |
| Aluminium niestopowe | |
| Stopy aluminium < 0.5% Si | |
| Stopy aluminium < 10% Si | |
| Stopy aluminium > 10% Si | |
| Grafit | |
| Cuivre non allié < 350 N/mm² | |
| Cuivre Laiton Bronze < 700 N/mm² | |
| Cuivre Haute resistance Bronze < 1500 N/mm² | |
| Aluminium non allié | |
| Aluminium Allié < 0.5% Si | |
| Aluminium Allié < 10% Si | |
| Aluminium Allié > 10% Si | |
| Graphite | |
| Медь нелегированная <350 N / мм2 | |
| Медь / Латунь / Бронза <700 N / мм2 | |
| Медь / Высокопрочная бронза <1500 N / мм2 | |
| Алюминий нелегированный | |
| Алюминиевый сплав <0,5% Si | |
| Алюминиевый сплав <10% Si | |
| Алюминиевый сплав> 10% Si | |
| Графит |
SHigh Temp. Alloys
| Titanium Unalloyed < 700 N/mm2 | |
| Titanium Alloyed < 900 N/mm2 | |
| Titanium Alloyed < 1250 N/mm2 | |
| Nickel Unalloyed < 500 N/mm2 | |
| Nickel Alloyed < 900 N/mm2 | |
| Nickel Alloyed < 1250 N/mm2 | |
| Inconel 718 | |
| 순수 티타늄 인장강도 70 Kg/mm2 이하 | |
| 티타늄 합금 인장강도 90 Kg/mm2 이하 | |
| 티타늄 합금 인장강도 125 Kg/mm2 이하 | |
| 순수 니켈 인장강도 50 Kg/mm2 이하 | |
| 니켈 합금 인장강도 90 Kg/mm2 이하 | |
| 니켈 합금 인장강도 125 Kg/mm2 이하 | |
| 인코넬 718 초합금 | |
| Tytan Niestopowy < 700 N/mm2 | |
| Stopy Tytanu < 900 N/mm2 | |
| Stopy Tytanu < 1250 N/mm2 | |
| Niestopowy Nikiel < 500 N/mm2 | |
| Stopy Niklu < 900 N/mm2 | |
| Stopy Niklu < 1250 N/mm2 | |
| Inconel 718 | |
| Titane < 700 N/mm² | |
| Titane < 900 N/mm² | |
| Titane < 1250 N/mm² | |
| Alliage Base Nickel < 500 N/mm² | |
| Alliage Base Nickel < 900 N/mm² | |
| Alliage Base Nickel < 1250 N/mm² | |
| Inconel 718 | |
| Титан нелегированный <700 N / мм2 | |
| Титан легированный < 900 N /mm2 | |
| Титан легированный < 1250 N /mm2 | |
| Никель нелегированный <500 N / мм2 | |
| Никелевые сплавы <900 N / мм2 | |
| Никелевые сплавы <1250 N / мм2 | |
| Инконель 718 |
HHardened Steel
| Steel Hardened < 45 HRC |
| Steel Hardened < 55 HRC |
| Steel Hardened < 65 HRC |
| 열처리강 경도 HRC 45 이하 |
| 열처리강 경도 HRC 55 이하 |
| 열처리강 경도 HRC 65 이하 |
| Stale o twardości do < 45 HRC |
| Stale o twardości do < 55 HRC |
| Stale o twardości do < 65 HRC |
| Acier Trempé < 45 HRC |
| Acier Trempé < 55 HRC |
| Acier Trempé < 65 HRC |
| Закаленная сталь <45 HRC |
| Закаленная сталь <55 HRC |
| Закаленная сталь <65 HRC |
| 7Thread Milling Type | ||
|---|---|---|
| 8Recommend Thread mills |
Choose the type of thread form
Thread Data
| Nominal Diameter(D) : | |
| Pitch/TPI : | |
| Thead Length(L) : | |
| Thread Angle : |
Tool Data
| Description : | |
| EDP No. : | |
| Thread Form : | |
| Thread Mill Type : | |
| Material : | |
| Internal/External : | |
| Nominal Diameter (D) : | |
| Pitch / TPI : | |
| Cutting Diameter (D1 ) : | |
| Shank Diameter (d) : | |
| Overall Length (L2 ) : | |
| Thread Length (L1 ) : | |
| Neck Length (Ln) : |
| No. of Flute(Z) : | |
| Spiral Angle : | |
| Shank : | |
| Thread Angle : | |
| Coating : | |
| Chamfer Angle : | |
| Effect. Diameter(Ds) : | |
| Drill Diameter(D3 ) : | |
| Drill Length(L3 ) : | |
| Max. C'sink(D4 ) : | |
| Effect. Length(Ls) : | |
| Cooling : |
CONTACT
Please contact us by clicking the icon if you want anotherthread type or other cutting method.